25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS tube,SSD Drives


25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS tube,SSD Drives by Aikenuo at Pacs BG. Hurry! Limited time offer. Offer valid only while supplies last. Specification: Dimension: 20mm x 25m (Width x Length) Glass fiber thickness: 0.15mm Thermal Conductivity:1.5 W/m-k Breakdown Voltage: 5KVAC Thermal impedance : 0.3℃in2/w Initial Adhesion: 1.5kg/inch 180°Adhesion power: >18 N/25mm Applicable temperature range:-30~+150 °C Features: Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (30~+150 °C ) can work for a minimum of 5 years. Notes For Attention:


Images:
25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS tube,SSD Drives by Aikenuo (Image #1)
4.1 out of 5 stars with 64 reviews
Condition: New
Availability: In Stock
$13.99


Quantity:  

 


View More In Heatsinks - Page 4.

Product Description & Reviews

Specification: Dimension: 20mm x 25m (Width x Length) Glass fiber thickness: 0.15mm Thermal Conductivity:1.5 W/m-k Breakdown Voltage: 5KVAC Thermal impedance : 0.3℃in2/w Initial Adhesion: 1.5kg/inch 180°Adhesion power: >18 N/25mm Applicable temperature range:-30~+150 °C Features: Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (30~+150 °C ) can work for a minimum of 5 years. Notes For Attention: 1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry. 2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength). 3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength, That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time. 4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion, In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape. Package included: 1 Roll Thermal Conductive Double-sided Tape

Features & Highlights

  • Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,
  • Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
  • Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
  • Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
  • Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.

Additional Information

Brand:
Aikenuo
Manufacturer:
Aikenuo
Category:
Heatsinks
Color:
20mm*25M
EAN:
6906755514011
Size:
0.15mm Thickness
Publisher:
Aikenuo
Binding:
Electronics
Package Weight:
0.35 pounds
Package Size:
4.5 x 1 x 4.5 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


12” inch Aluminum High Power Bonded Fin Heat Sink Assembly for Natural or Forced Air Convection – 16 Fin with Mounting Brackets
By Machtron
ean: 0634746391001,

5PCS SP1848-27145 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 150℃
By Walfront
mpn: Walfront0725, ean: 0654936851436,

Antrader 6pcs 28 x 28 x 20mm Aluminum Heatsink Cooling Fin Black
By Antrader
mpn: AZ18050507,

Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Amplifier Transistor Semiconductor Devices with Dense 19 pcs Fins 11.8"(L) x 5.51"(W) x 0.79"(H) / 300 mm (L) x 140 mm (W) x 20 mm (H)
By walfront
mpn: 43272-950, ean: 0736691271961,



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - pacsbg.com. All Rights Reserved.