Bluetooth Mate Silver with RN-42 class 2 module
Free Shipping Included! Bluetooth Mate Silver with RN-42 class 2 module by Roving Networks at Pacs BG. MPN: 5811007. Hurry! Limited time offer. Offer valid only while supplies last. The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. This one also comes in retail packaging. Check below for the non-retail version. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 30ft
Product Description & Reviews
The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. This one also comes in retail packaging. Check below for the non-retail version. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 30ft (10m)!
Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. Because we've arranged the pins to do this, you cannot directly plug the Bluetooth Mate to an FTDI Basic board (you'll have to swap TX and RX).
This unit ships with an RN-42 class 2 bluetooth module, a very easy-to-use and well documented bluetooth module. Make sure you check out the datasheet and command set links below.
The Bluetooth Mate has on-board voltage regulators, so it can be powered from any 3.3 to 6VDC power supply. We've got level shifting all set up so the RX and TX pins on the remote unit are 3-6VDC tolerant. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit if you need to attach this to a computer.
Unit comes without a connector; if you want to connect it to an Arduino Pro, we'd suggest the 6-pin right-angle female header.
Note: The hardware reset pin of the RN-42 module is broken out on the bottom side of the board. This pin is mislabeled as 'PIO6', it is actually PIO4. Should you need to reset the Mate, pull this pin high upon power-up, and then toggle it 3 times.
Features & Highlights
- Designed to work directly with Arduino Pro's and LilyPad main boards
- FCC Approved Class 2 Bluetooth Radio Modem, Integrated antenna
- Low power consumption : 25mA avg
- Operating Voltage: 3.3V-6V
- Serial communications: 2400-115200bps
Bluetooth Network Adapters
0.25 x 2 x 4 inches
4.1 x 1 x 5.5 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Roving Networks, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: aa1, ean: 0641945144369,
This mini USB Bluetooth version 4.0 adapter with high speed transfer rate , simple pairing features it's a simple solution to enable your computer connect with smartphone, tablet or other Bluetooth device.Compatible with most laptops and PC's; Quick and simple setup! Just plug, install and play. Features: This mini USB Bluetooth 4.0 adapter with high speed, simple pairing, good anti-jamming features, it's a simple solution to enable your computer connect with smartphone, tablet or other
By Microsemi Corporation
mpn: PD-9002GHO/AC, ean: 0844117001983,
PowerDsine 9501GO Power over Ethernet (PoE) single- port midspan offers a fully IEEE 802.3at compliant solution for outdoor installations, guaranteeing 60 Watts of power while ensuring safe and reliable operation in outdoor environments. It allows wireless LAN access points, security network cameras and other IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered. The 9501GO also offers surge protection for both the AC
Different from BR/EDR (traditional Bluetooth) and Bluetooth 3.0, BLE is used to transfer little data rather than audio and massive data. This is because its low power consuming character. In order to keep consuming low power, it simplified hand-in-hand protocol and shortened awaking time. In short time and little data transportation, it only consumes 10% power of traditional Bluetooth. But if in long time and massive data transportation, its low power consuming character won't show its
Wireless Display Receiver Miracast Wifi Display Adapter Screen Mirroring Dongle compatible Airplay Miracast DLNA Support for IOS Devices Android Smartphone Mac WindowsMobile wireless/screen/computer notebook pushes to HD display deviceStable and More easy connecting.Supports Car HDMI, like CarPlay Streaming Video From Phone to Big Screen.Wide Used in Business meeting, Home theater,Game experience. Eye-protecting!1080P High Definition:1080P HDMI Image (Streaming Video from phone to Big Screen)