Pacs BG

ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32


Mega Sale! Save 22% on the ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm at Pacs BG. MPN: TB-2018-16. Hurry! Limited time offer. Offer valid only while supplies last. [Packing List] 1 x ESP32 WROVER IPEX Development Board [Overview] Geekworm ESP32 WROVER-i DevKit is a low-footprint, minimal system development


Images:
ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm (Image #1)
ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm (Image #2)
ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm (Image #3)
ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm (Image #4)
ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm (Image #5)
ESP32 WROVER IPEX Development Board with 4MB PSRAM WiFi+Bluetooth Low Power Consumption Dual Cores ESP32 by Geekworm (Image #6)
Brand: Geekworm
4.8 out of 5 stars with 139 reviews
Condition: New
Availability: In Stock
$15.99
$12.59
You Save: 21%


Quantity:  

 



Product Description & Reviews

[Packing List]
1 x ESP32 WROVER IPEX Development Board

[Overview]
Geekworm ESP32 WROVER-i DevKit is a low-footprint, minimal system development board which is powered by our latest ESP32-WROVER ipex module and can be easily adjusted to a breadboard, and build in ESP32-WROVER Module ipex version module.

[New and Powerful]
Built around the ESP32-WROVER Module IPEX module, this minimal system development board achieves optimal performance with its rich peripheral set, Wi-Fi and Bluetooth radio solutions, which are offered by our latest SoC, the ESP32. The limit is your imagination!

[Rapid Prototyping]
Get right into application design and development without worrying about RF performance and antenna design. The DevKitC has your basic system requirements already covered. Just plug in the USB cable and you're good to go!

[Flexible and Feature-Rich]
The WROVER DevKit contains the entire basic support circuitry for the ESP32-WROVER Module, including the USB-UART bridge(CH340), reset- and boot-mode buttons, LDO regulator and a micro-USB connector. All pin export GPIO is available to the developer.

[More details & Download]
Pleaser refer to our wiki: www.raspberrypiwiki.com/index.php/ESP32_WROVER-i_DevKit

Features & Highlights

  • Geekworm ESP32 WROVER-i DevKit is a low-footprint, minimal system development board which is powered by our latest ESP32-WROVER ipex module and can be easily adjusted to a breadboard, and build in ESP32-WROVER Module ipex version module.
  • Built around the ESP32-WROVER Module IPEX module, this minimal system development board achieves optimal performance with its rich peripheral set, Wi-Fi and Bluetooth radio solutions, which are offered by our latest SoC, the ESP32. The limit is your imagination!
  • Get right into application design and development without worrying about RF performance and antenna design. The DevKitC has your basic system requirements already covered. Just plug in the USB cable and you're good to go!
  • The WROVER DevKit contains the entire basic support circuitry for the ESP32-WROVER Module, including the USB-UART bridge(CH340), reset- and boot-mode buttons, LDO regulator and a micro-USB connector. All pin export GPIO is available to the developer.
  • More details & Download: Pleaser refer to our wiki: www.raspberrypiwiki.com/index.php/ESP32_WROVER-i_DevKit

Additional Information

Brand:
Geekworm
Manufacturer:
Geekwrom
Category:
Network Transceivers
Color:
ESP32-WROVER ESP32 IPEX Module
Model:
TB-100024
MPN:
TB-2018-16
Part Number:
TB-2018-16
Publisher:
Geekwrom
Binding:
Electronics
Item Size:
0.98 x 0.59 x 2.56 inches
Package Weight:
0.03 pounds
Package Size:
2.32 x 0.51 x 4.53 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Geekworm, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


AV Access USB Extender 165ft Over Cat5e/6,with 4 USB2.0 Ports,Plug and Play,No Driver,Supports All Operating System,Two Web Cameras Work Synchronously
By AV Access
mpn: U2EX50, ean: 0667673853427,
OverviewUSB 2.0 Extender extends high-speed USB devices over a single CAT-5e cable, combines a USB extender and a USB hub to allow connecting as many as four USB 2.0 (Up to 480Mbps and/or USB 1.1) devices up to 165 feet away from your computer.The co...

uxcell 10 Pcs SOP16 0.65mm to 1.27mm PCB Adapter Converter Green
By uxcell
mpn: a16041800ux1934,
Description:SOP16 0.65mm to 1.27mm PCB Adapter ConverterProduct Name: PCB Adapter Converter; Weight: 10g. Package Content: 10pcs x PCB Adapter Converter. Type: SOP16 0.65mm / 1.27mm. Total Size: 21.5 x 15.8 x 1.6mm / 0.85" x 0.62" x 0.06" (L*W*T). Ma...

uxcell 5pcs Prototyping Double Side PCB Board Stripboard Green 34mmx26.5mm
By uxcell
mpn: a16033000ux1105,
Great for building a prototype of an electronic circuit, double side copper PCB.Referencing numbers printed on four sides for easy reference of individual holes.Net Weught: 15g; Product Name: Universal PCB Board. Package Content: 5pcs x Universal PCB...

Ubiquiti PoE-24 Passive PoE Adapter EU, 24V 0.5A, grounding/ESD protection, 12W
By Ubiquiti Networks
mpn: POE-24-12W, ean: 0810354022982,
Ubiquiti Networks POE-24-12W - PoE Injector 24V 12W...

Scroll To Top


Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - pacsbg.com. All Rights Reserved.