Blowout Sale! Save 76% on the Heat Bed Power Module, MYSWEETY 4PCS Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module with Cables for 3D Printer by MYSWEETY at Pacs BG. MPN: 304750-US2. Hurry! Limited time offer. Offer valid only while supplies last. Heated Bed Power Module Features: Helps 3D printer equipped with the controller board (capable of max 15A) become more powerful. With this add-on
Product Description & Reviews
Heated Bed Power Module Features:
Helps 3D printer equipped with the controller board (capable of max 15A) become more powerful.
With this add-on module to board lead the maximum current up to 25A.
If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
Max Current: 25A (Enhance heat dissipation)
Mounting holes: 3.2mm diameter, for M3 screws.
1.This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.
2.Please double-confirm the wire you connect is right when installing this MOSFET Board, if you have any issue please contact us firstly, thanks!
4 x Heated Bed Power Expansion Module
4 x Connection cable for input signal
8 x Connection Wires for Hot Bed
8 x Power Cords
Features & Highlights
- This high power module is a general add-on heated bed power expansion module for 3D printer. Effective to resolve the hot bed power is too large and the load current problems. It compatible with Anet A8 and most 3d printers.
- The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
- With this add-on module to your controller board, you can lead the maximum current up to 25A. If you need anything greater or equal to 15A this module is a must!
- When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
- Note: Under the premise of normal cooling, it works stably under I(Max)=25A, the current must NOT exceed 25A while in the work process.
5.51 x 1.57 x 6.3 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by MYSWEETY, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By T POWER
mpn: TP-ts8-L88, ean: 0700220518827,
T-Power Made with the highest quality (( Extra Long 6.6ft cable cord )) Total Cord Length Is Extended to 6.6 ft Brand-new Input Voltage Range: AC 100V - 240V 24Vdc 1-year limited warranty.Compatible Model: Dymo LabelWriter 400 450 P/N : 93176 93089 ...
mpn: C31C518653, ean: 0132017636207,
Epson Tm-u220pd-653 Dot Matrix Receipt Printer Parallel Epson Dark Gray No Autocutter Power Supply IncludedNew. EPSON (SS-MET) C31C518653. epson (ss-met) c31c518653 tm-u220pd-653 par edg solid cover pwr sply incl. ...
mpn: RM1-8392-050CN, ean: 0000886842732,
ELECTRICAL COMPONENTS ASSY....
By Zebra Technologies
mpn: P100I-0000A-ID0, ean: 0132017702063,
Zebra P100i Thermal Card Printer P100I-0000A-ID0 Thermal & Label PrintersQuality direct-to-card ID printer with single-side printing capability. Full color and monochrome printing options. Single feed card input. Easy, intuitive USB interface. 2 year...