KNACRO W5500 Ethernet Network Module Hardware TCP/IP 51/STM32 Microcontroller Program over W5100
KNACRO W5500 Ethernet Network Module Hardware TCP/IP 51/STM32 Microcontroller Program over W5100 by KNACRO at Pacs BG. MPN: W5500. Hurry! Limited time offer. Offer valid only while supplies last. SPI (Serial Peripheral Interface) provides an easy interface connected to the external MCU. The W5500 supports up to 80MHZ SPI communication speed.
Product Description & Reviews
SPI (Serial Peripheral Interface) provides an easy interface connected to the external MCU.
The W5500 supports up to 80MHZ SPI communication speed.
In order to reduce system power consumption, W5500 provides a network wake-up and sleep modes.
W5500 will wake when receiving the original Ethernet packet in the form of magic packet.
Hardware support TCP / IP protocols: TCP, UDP, ICMP, IGMP, IPv4, ARP, IGMP, PPPoE and Ethernet.
Supports eight independent ports (sockets).
It provides sleep mode.
Support high-speed SPI bus (SPI mode 0,3).
32K bytes of internal memory as TX / RX buffer.
Embedded 10 / 100Mbps Ethernet Physical Layer.
It supports auto-negotiation (10 / 100Base full / half duplex).
IP fragmentation is not supported.
3.3V operating voltage, I / O port can withstand 5V voltage.
Multiple indicator signal output (full / half duplex mode, network connectivity and network speed).
1*W5500 Ethernet Network Module
Features & Highlights
- The W5500 module is a module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack;
- Support transmission rate of 10/100MBPS;
- Support sleep mode and wake on LAN ,Within the integrated 32K TX/RX cache;
- Support 8 independent ports run at the same time,Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol;
- Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines.
2.52 x 0.31 x 2.52 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by KNACRO, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 665240-B21, ean: 5054533448117,
The HP Ethernet 1Gb 4-port 366FLR features the next generation of Ethernet integration offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 4 ports of 1Gb Ethernet. The HP 366FLR is the PCI Express ...
mpn: PEXUSB3S2, ean: 0031112765082,
Add 2 USB 3.0 ports to your desktop computer through a PCI Express expansion slotProviding speeds up to 10x faster than that of USB 2.0, this PCI Express USB 3.0 card enables you to access your data and transfer files much faster than USB 2.0, by add...
mpn: 100413909901, ean: 4895135743290,
SEDNA - Se-PCIE-LAN-GIGA-BCM Broadcom BCM5721 PCI Express gigabit network card for server Specifications: •PCIE 1x •High-performing, auto-negotiating 10/100/1000 connection •Easy, cost-effective migration to Gigabit Ethernet over existin...
mpn: 716591-B21, ean: 8871119846924,
The HP Ethernet 10GbE dual port 561T adapter features the latest generation 10 GbE Intel® Ethernet Controller X540. The HP 561T is a low cost, low power dual port 10GBASE-T adapter designed for use in HP ProLiant Gen8 rack, tower, and scalable serve...