Pacs BG

NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure


Free Shipping Included! NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis at Pacs BG. Hurry! Limited time offer. Offer valid only while supplies last. product name:HDD Enclosure Interface:M.2 NVME/USB 3.1 Color:grey weight:137g Material:aluminum size:L 105 x W 45 x H 14 mm Installation Diagram:


Images:
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #1)
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #2)
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #3)
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #4)
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #5)
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #6)
NVMe Enclosure PCIe M.2 2280 SSD Box,Type-C USB 3.1 NVME Solid State Hard Disk Case,HDD Enclosure by Acasis (Image #7)
Brand: Acasis
4.8 out of 5 stars with 10 reviews
Condition: New
Availability: In Stock
$65.99


Quantity:  

 


View More In Hard Drive Enclosures.

Product Description & Reviews

product name:HDD Enclosure
Interface:M.2 NVME/USB 3.1
Color:grey
weight:137g
Material:aluminum
size:L 105 x W 45 x H 14 mm

Installation Diagram:

1. Prepare the accessories before installation: Hardware aluminum housing (Figure: chassis with silicone gasket), bottom shell PCB board, NVMe SSD hard disk (face paste good silica gel sheet), screwdriver, bottom shell screws.
2. Insert the prepared SSD hard disk (must be PCIE) according to the direction regulation on the PCB board.
3. Buckle the golden copper pillars at the end of the SSD hard disk, and gently press the hard disk until the copper pillar chassis and the corresponding PCB copper holes coincide with each other.
4. Press the copper post and turn it over the back of the PCB board to lock the set screw.
5. Put the PCB board with SSD hard disk reversal into the case. Note: The Type-C connector must be installed in place.
6. After the PCB board is in place, fix the board with two screws on the locking plate.
7. The direction of the bottom shell cover (for the sake of beauty, the bottom of the product we use a lock design, just insert the bottom cover fastened, don't need screw to lock).
8. Press the bottom shell to be flat and lock the two screws at the front.

Features & Highlights

  • Radiating Advanced Aluminum Case, USB 3.1 Type-C to M key M.2 SSD enclosure for Intel 600P NGFF PCI express NVMe
  • Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type. The PCI-E Interface Implements The NVMe Protocol Standard
  • Seamless Cloning and File Transfers with the Samsung Magician Software, the Ideal Ssd Management Solution For Performance Optimization and Data Security with Automatic Firmware Updates
  • The NVMe interface (PCIe M.2 2280) offers enhanced bandwidth, low latency, and power efficiency, perfect for tech enthusiasts, high-end gamers, and 4K & 3D content designers
  • NOTE:Only for M-Key M.2 SSD (PCI-E NVMe-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based), applicable to size 2230 / 2242 / 2260 / 2280.

Additional Information

Brand:
Acasis
Manufacturer:
ACASIS
Category:
Hard Drive Enclosures
EAN:
6958945702074
Publisher:
ACASIS
Binding:
Electronics
Package Weight:
0.52 pounds
Package Size:
4.29 x 1.34 x 6.42 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Acasis, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


IDE Adapter Cable, FIDECO USB 3.0 to SATA Adapter Hard Drvie Converter IDE Cable 2.5" / 3.5" / 5.25" SSD SATA III Drives Offline One Touch Clone Tool-Free (IDE Cable PL06)
By FIDECO
ean: 0712492045673,
FIDECO Factory Leading Aluminum USB IDE or SATA Adapter for 2.5 / 3.5 inch SATA HDD/SSD & IDE HDD 3.5 inch Support Multiple Drives up to 10TB Dual-Head SATA Connector plus one IDE Connector. Supported Drives: two 2.5" /3.5" SATA HDD/SSD simultaneou...

ORICO Aluminum 4 Bay 3.5 inch Hard Disk Drive Case HDD RAID Enclosure ,USB 3.0 & eSATA Support UASP and SATA III 6.0Gbps Speed (3549RUS3)
By ORICO
mpn: ORICO 3549RUS3-US-SV, ean: 6954301104193,
Smart and Humanized Perfectly support 8TB large capacity 3.5 inch SATA1/2/3 HDD, maximum 4x8TB=32TB High quality aluminum case to promote HDD's heat dissipation, fashionable modeling Tool free to install HDD, support USAP and hot-swap Tray desig...

Nekteck USB Type C USB3.1 (USB-C) to SATA 2.5/3.5 Inch External Hard Drive Disk Docking Station Enclosure for for 3.5" 2.5" SATA HDD and SSD [Support Up to 8TB] - Tool Free, 1 Bay
By Nekteck
mpn: NK-6619C3-S, ean: 0634324696528,
The enclosure ONLY come with Type C to A 3.1 cable Bring your life more convenience and your computer more space! Nekteck USB Type C to A External Hard Drive Docking Station does it all for you. The latest and most advanced USB C connector allows you...

Bipra USB 2.0 to SATA/IDE Adapter Kit with Power Adapter for 2.5/3.5/5.25 Inch SATA or IDE Drive
By BIPRA
mpn: BC80106, ean: 5060391865959,
The BIPRA USB 2.0 to SATA/IDE Adapter allows you to connect any SATA or IDE drive to your computer's USB port. This is the perfect tool to duplicate, copy, backup, or transfer large amount of data from one drive to another. Easy to take to any locat...

Scroll To Top


Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - pacsbg.com. All Rights Reserved.