Huge Savings Item! Free Shipping Included! Save 18% on the seeed studio W5500 Ethernet Shield by seeed studio at Pacs BG. MPN: 8.41454E+11. Hurry! Limited time offer. Offer valid only while supplies last. The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity
Product Description & Reviews
The W5500 Ethernet Shield v1.0 can be used to provide your projects with internet connectivity.W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The shield also have two Grove connectors and a microSD card socket to support projects which require storing large amounts of data from Grove sensor. The RJ45 port (Where the Ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.
Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Supports 8 independent sockets simultaneously
Supports Power down mode
Supports Wake on LAN over UDP
Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
Internal 32Kbytes Memory for TX/RX Buffers
10BaseT/100BaseTX Ethernet PHY embedded
Supports Auto Negotiation (Full and half duplex, 10 and 100* based )
Not supports IP Fragmentation
3.3V operation with 5V I/O signal tolerance
LED outputs (Full/Half duplex, Link, Speed, Active) Micro-SD card socket
Grove connector for I2C and UART
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.
Features & Highlights
- The shield also have two grove connectors and a microsd card socket to support projects which require storing large amounts of data from grove sensor.
- The rj45 port (where the ethernet cable is connected to) is low enough to allow you to stack more shields on top of this one if needed.
- Led outputs (full/half duplex, link, speed, active).10baset/100basetx ethernet phy embedded.supports power down mode.supports hardwired tcp/ip protocols : tcp, udp, icmp, ipv4, arp, igmp, pppoe
- Supports wake on lan over udp.supports 8 independent sockets simultaneously.internal 32kbytes memory for tx/rx buffers
- Supports high speed serial peripheral interface(spi mode 0, 3).supports auto negotiation (full and half duplex, 10 and 100* based )
|Package Weight:||0.1 pounds|
|Package Size:||2.76 x 0.98 x 0.98 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by seeed studio, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: NF9N-2930, ean: 4713072776419,
Featuring the Intel Celeron N2930 Quad-Core Processor (Intel Baytrail), the Jetway NF9N-2930 is an industrial, long-availability (Long-Life Embedded series; planned lifecycle through Q1 2019) Mini-ITX motherboard. This motherboard supports Jetway's ...
mpn: 78LMT-USB3 R2-cr, ean: 0800265771994,
Â Â Specifications Mfr Part Number: GA-78LMT-USB3 R2 CPU: Socket AM3 Supports AMD AM3+ Processors Supports AMD AM3 Phenom II processor / AMD Athlon II Processors Chipset:Â North Bridge AMD 760G & South Bridge AMD SB710 Memory: 4x DDR3-1600(O...
More Download information, please visit :www.kookye.com/?p=6338 Note: When you open the Arduino IDE software, pls go to the Tool and choose the board "Arduino Micro" -- The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. T...
By SmartFly Info
mpn: M2Ultra, ean: 0643858168968,
Banana PI BPI-M2 Ultra is the open source hardware platform, Banana PI BPI-M2 Ultra is a quad-core cortex -A7 CPU ,use Allwinner R40 design, it support WIFI+BT on board.and support SATA interface on board. Features: CPU: Quad Core ARM Corte...