WHDTS 2.4GHz E01-ML01DP5 Transceiver 22dBm nRF24L01P+PA+LNA Wireless Transmission Module 100mW 2500M Measured Distance with Antenna by WHDTS at Pacs BG. MPN: 4328612924. Hurry! Limited time offer. Offer valid only while supplies last. Parameters: Power Supply:2.0V--3.6VDC Measured distance:2500M Communications levels:0.7VDD--5.2VDC Maximum power:20dBm (about 100mW)
Product Description & Reviews
- Power Supply:2.0V--3.6VDC
- Measured distance:2500M
- Communications levels:0.7VDD--5.2VDC
- Maximum power:20dBm (about 100mW)
- Gbps:250k,1M,2M, Adjustable
- Emission current:95mA
- Sinks current:20mA
- Communication interface:Standard SPI mode
- Transceiver length:single packet:1-32 bytes, 3 FIFO buffer
- RSSI support: Only support packet loss statistics
- Working temps:-30℃~+85℃
- Working Humidity:＜90% RH
- Storage Temp:-40℃~+125℃
- Operating frequency:2400MHz-2525MHz（1MHz step ）
- Receiving Sensitivity:-106dBm@250Kbps -96dbm@1Mbps -92dbm@2Mbps
TIPS FOR YOU
1. Static electricity: High-frequency simulators is electrostatically sensitive. Please avoid to direct contact with the electronic components on the stencil as much as possible.
2. Power supply: Power quality has a greater impact on the performance of the module. Make sure that the module power supply has a small ripple and avoid large power jitter.
3. Crystal: If there is a crystal near the circuit board where this module is located, increase the linear distance between it and the crystal oscillator as much as possible.
4. Temperature, humidity, and co-channel interference will result in increased packet loss.
5. The ground absorbs: The test results near the ground are less than ideal.
6. Metal object: The antenna attachment has a metal object, or placed in a metal shell, the signal attenuation will be more serious.
7. Setting: The power register is set incorrectly and the air speed is set too high. (the higher the air speed, the closer the distance)
Please don't hesitate to contact us if you have any needs or questions, our strong customer service team is always on your side. Looking forward to your consultation.
Features & Highlights
- With the original nRF24L01+ chip which is lower power consumption and strong anti-interference
- The measured distance can reach to 2500M, shielding function and low-radiation
- Frequency:2.4GHz; Max Power:100mW
- With a FREE 2.4G SMA Antenna
- Industrial standard module which has passed CE and ISO9001 Certification
NRF24L01+PA+LNA + SMA Antenna
2.44 x 0.71 x 3.39 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by WHDTS, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: 4335277708, ean: 0190033873006,
Description:WIFI Kit series is the new development cost-effective networking program of our company, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802...
mpn: SFP-7060-WB, ean: 0811704010772,
This SFP module covers most Gigabit Ethernet fiber optic applications for single strand, single mode fiber 9/125um on distances up to 60Km, using Tx:1550nm/Rx:1490nm. Transceiver has a single LC connector and must be matched with an A type to operate...
10Gtek's A7S2 series Media Converter is use to expanding existing Gigabit Ethernet networks. The easy implementation and expansion of 1000Base-TX/FX networks can be further assured with this converter. The converter is completely transparent when co...
WINGONEER trademark Reg.NO:4747611WINGONEER 3Pcs NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102Feature:32 Things kernel dedicated SOC powerful system, but also with WIFI TCP / IP application! The rapid development of computer ter...