Add PoE to any ethernet switch. Replace up to 12 individual power over ethernet injectors with this single POE module. Full details and data sheet on our web site.
Rack Mounted PoE injector
Extend power to 328 ft or 100 meters
This device offers
* 16 RJ45 jacks with Data + Power out
* power per port limited to 650 ma
* 16 RJ45 jacks Data in - connect to your switch
* 2.1mm x 5.5mm DC power jack
* screw terminal alternate DC power connector
* Failover function internally
* LED power status
* 10/100 operation
* we offer 9 different power supply options
Used to provide PoE power to:
* IP phones like Polycom, Cisco, Yealink
* note: 5v and 12 volt non-PoE devices require a separate adapter, contact us for more info.
* WiFi Access points
* IP Cameras
* 802.3af devices
These devices provide power on the spare data wires in the ethernet cable. All devices receive the same voltage - choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more
We offer 18v, 24v and 48v supplies, with 60 and 120 watt versions, also 12, 8 port versions.
Full details and data sheet at https://www.poetexas.com/
Uses a 2.1mm x 5.5mm DC connector. We also stock 12v to 48v power supplies.