Super Savings Item! Save 34% on the Youngneer PL2303TA USB to TTL Serial Cable for Raspberry Pi BeagleBone Programming Console Debug Cable 3.3Ft 5 Pack by Youngneer at Pacs BG. Hurry! Limited time offer. Offer valid only while supplies last. Four Wire Designation: ● Red - +5v ● Black - GND ● Green - TXD ● White - RXD Good Connectivity to to your micro controller, Raspberry Pi,
Product Description & Reviews
Four Wire Designation:
● Red - +5v
● Black - GND
● Green - TXD
● White - RXD
Good Connectivity to to your micro controller, Raspberry Pi, WiFi router and BeagleBone Black.
Supporting most common OSes: win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux
Mufti-function of USB to TTL Cable
● Ideal tool to simple serial communication or GPS serial communication
● Used for updating router or ADSL firmware
● Used for updating hard disk driver firmwares
● Debugging tool to common serial port
● Used for super terminal
● Used for updating all kinds of satellites
How to Use:
1.Downloading the Prolific 2303 driver (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41)
2.Restart the computer
3.Plug this usb ttl cable to the computer USB port and the system will install the driver automatically
4.Connecting TXD and RXD wire (using dupont cable to connect TXD and RXD pin )
5.Opening serial port debugger
100% Satisfaction Guarantee:
12-Month Warranty; No satisfied,Free reason for return.
Attention Please:this cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc.
Package: 5 pack ttl usb cable included
Features & Highlights
- 【Wide Application】- this usb ttl serial cable is designed to used for USB to TTL electronic projects, providing an easiest way to connect to your microcontroller/Raspberry Pi/WiFi router/BeagleBone Black. This usb debug cable can also used as serial port communication so that it can help you debugging your equipment and upgrade.
- 【Strong Compatibility】- this usb to ttl cable can be perfectly compatible with win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux operating system.
- 【Compatible with USB V2.0】- Built-in PL2303 chipset, this pl2303 usb cable is fully compliant with USB specification v2.0 (Full-Speed).
- 【Power Output】- Red - Power (5v) this pin provides up to 500mA current; Black - Ground; Green - Tx; White - Rx; it can independently power the circuit with 5v or 3.3v.
- 【Attention Please & 100% Satisfaction Guarantee】- this usb ttl serial cable is not good for Arduino re-programming such as a Boarduino, MENTA, Monochron, etc. 12-Month Warranty; No satisfied,Free reason for return.
4.5 x 0.6 x 7 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Youngneer, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
High Speed flexible cable is for 1U,2U chassis,Supports high speed PCI-E 1X, 4X,8X and16X card, but work at 1X speed only. Total length: 24cm, cable length: 20cm,Utilize high quality flexible cable which is extremely soft and compact. Experienced des...
mpn: 1us3cf8ky9rq1dl4, ean: 0759981826689,
Specifications: Name: PCI-E1X to 16X extension cord 4pin Wire length: 60cm/23.6in Single Net weight: 84g Interface: PCI-E 1X Single Size: 130 X 44 X 15mm/51.18 X 17.32 X 5.91in Package Includes: 20 X PCI-E 16X Interface 20 X PCI-E 1X Riser Plate 20 ...
By PK Power
PK Power UL Listed 6ft/1.8m AC Power Cord for Roland Fantom S6 X8 Workstation Expansion Bay Outlet Plug CableCABLE LENGTH: This power cord is 6FT/1.8m. BEST QUALITY: This UL listed Cable is Tested BY Manufacture With High Quality,Will not Cause a Fir...
mpn: CC-P-001S, ean: 0735548669593,
Janam, accessory, serial cable cup assembly for XP20; power supply ac-xp-1 is required to charge a device; replaces sc-xp-1.Janam. Accessory. Serial Cable Cup Assembly For Xp20; Power Supply Ac-Xp-1 Is Required To Charge A Device; Replaces Sc-Xp-. Co...